|
|
 |
Athena’s Series IMP Modules use microprocessor-based circuitry to perform all required control functions. Units have built-in diagnostics and are fully self-tuning– setpoint temperatures are maintained without the need to manually preset or adjust the control temperature.
Download:
Datasheet
Manual
|
|
|
|
 |
The Athena Series RMB, part of the new Series RM family, is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and three discrete indicators for normal, manual and standby modes.
Download:
Datasheet
Manual
|
|
|
|
 |
Athena Portable MFL Mainframes offer the flexibility of 1 to 3 zones of control at 15 amps per Zone. The MFH Mainframes offer Zone control up to 30 amps.
The portable mainframes support the following Athena control modules: IMP, RMA, RMB and RMC.
Download:
Datasheet
Manual
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Transformer kits are fully wired and include enclosed transformer (480 Vac 30 in, 240 Vac 30 out) with adjustable voltage taps, power cable to main frame, disconnect switch, extra fuses, and floor stand with all hardware. Other transformers are available for your particular power requirements.
Download:
Datasheet
|
|
|
|
|
|
 |
The Athena Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual and closed loop mode.
Download:
Datasheet
Manual
|
|
|
|
 |
The Athena Series RMC brings new and highly productive benefits to injection molders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate. Using the popular Modbus® communications protocol, the next-generation RMC gives users the ability to set or change all zones, either remotely from a desktop computer, or (with the ALL command) from any other individual RMC module in the mainframe.
Download:
Datasheet
Manual
|
|
|
|
 |
The Athena Series RMT is a microprocessor-based, dual-zone temperature controller specifically designed for runnerless molding applications effectively doubling the zone count per module without doubling the price.
Download:
Datasheet
Manual
|
|
|
|
|
IMP/P
|
Athena’s Series IMP Modules use microprocessor-based circuitry to perform all required control functions. Units have built-in diagnostics and are fully self-tuning– setpoint temperatures are maintained without the need to manually preset or adjust the control temperature.
Download:
Datasheet
Manual
|
|
RMC/P
|
The Athena Series RMC brings new and highly productive benefits to injection molders looking for a modular hot runner controller that’s flexible, easy to set up, and simple to operate. Using the popular Modbus® communications protocol, the next-generation RMC gives users the ability to set or change all zones, either remotely from a desktop computer, or (with the ALL command) from any other individual RMC module in the mainframe.
Download:
Datasheet
Manual
|
|
|
|
|
|
 |
Prewired 5, 8, 12-Zone Mold Junction Box for Hot Runner Wiring
Athena Prewired Mold Junction Boxes feature an innovative design that makes hot runner wiring fast, easy, and logical. Boxes contain a 25-pin power connector for 15 AMP/240 zones, and a 10, 16 or 24 pin thermocouple connector.
Download:
Datasheet
|
|
|
|
|
