|
Series 16C DIN Temperature/Process Controller
|
|
 The Athena 16C is a 1/16 DIN panel mounted, autotuning controller that can be used for precise control of a single loop with two independent outputs fieldconfigurable as direct acting, reverse acting or alarm. RS-232 or RS-485 communications interfaces are available, and two digital LED displays provide visual indication of various controller functions.
• Field-Configurable Universal Inputs
• User-Selectable Ramp to Setpoint
• 8-Level Ramp/Soak Control
• Bumpless Auto/Manual Transfer
• NEMA 4X (IP65) Dust and Splash-Proof Front Panel
• Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
• On/Off Through Full PID Operation (P, PI, PD, PID)
• Adjustable Hysteresis and Deadband
• Outputs Configurable as Alarms
• Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
• Dual Output/Dual Alarm Capabilities
• UL, cUL, and CE Approvals
• Options Include Multi-Function Contact/Digital Input, Transducer Excitation, and Auxiliary Output
• Special and Custom Options Available
• DIN Rail Option
Downloads
Datasheet
Manual - Basic
Manual - Standard Options & User's Guide
|
|
|
Series 1ZC DIN Rail Type Temperature/Process Controller
|
|
 The Athena 1ZC is a DIN rail mounted, auto-tuning controller that can be used for precise control of a single control loop with two independent outputs configurable as direct-acting, reverse-acting or alarm. A bidirectional RS-485 serial communications interface is standard. Discrete LED displays become illuminated whenever associated outputs are active and provide system status. A wide range of sensor inputs are supported and many types of outputs are available.
• Miniature DIN Rail Mountable Enclosure Stackable to Required Number of Zones
• Each Zone Independently Powered 100-250 V 50/60 Hz
• RS-485 Modbus® Serial Communications
• Easy Communications Bus Wiring
• Auto-Tune
• Each Output Universally Configurable as Heat/Cool or Alarm
• Accepts RTD (2 and 3 Wire), Thermocouple, and Linear Inputs
• Loop Break Alarm
• Pluggable Terminal Block for Easy Wiring and Controller Replacement
• Optically Isolated Inputs and Outputs
• UL, cUL, and CE Approvals
Downloads
Datasheet
Manual
|
|
|
Multi-Comm Software
|
|
 Athena Multi-Comm Software is designed for use with all Infinity with Modbus®, C-Series with either Modbus or Athena+ and Legacy Series Controllers using Athena+, and can control up to 100 temperature or process controllers/zones via an RS-485 network.* Up to sixteen controllers/zones can be simultaneously viewed on screen at one time with a color emulation of each controller’s front panel display showing process value and setpoint in real time.
• Pull-Down Menus and Pop-Up Windows Make Controller Configuration and Data Analysis Easy
• Multiple Operator Security Levels and Password Protection Prevent Unauthorized Access or Accidental Changes to Process Parameters
• Automatic Controller Detection Locates and Identifies Each Controller or Control Zone on the Network
• User-Defined 10-Character Controller Labels Allow Custom Identification of Any Controller or Control Zone
• Storage and Retrieval of all Configuration Parameters for all Networked Controllers or Control Zones to a Single Data File
• Provides Each Controller or Control Zone with Two Additional Local Alarms (Process Hi/Lo) Without Affecting Other Alarms
• Captures and Time-Stamps Process Value and Setpoint Data to Log File for Subsequent Storage and Analysis
• Displays Graph Window Showing Real-Time Plot of Process Value vs. Setpoint for Any Controller or Control Zone on Network
Downloads
Datasheet
Manual
|
|
|
|
|
Series 18C/19C/25C DIN Temperature/Process Controller
|
|
 The Athena 18C and 19C are available as 1/8 DIN (18C) vertical or 1/8 DIN (19C) horizontal models. Both panel mounted, auto-tuning controllers can be used for precise control of a single loop with two independent outputs field-configurable as direct acting, reverse acting, and 2 alarms. RS-232 or RS-485 communications interfaces are available for both models, and two digital LED displays provide visual indication of various controller functions.
• Field-Configurable Universal Inputs
• User-Selectable Ramp to Setpoint
• 8-Level Ramp/Soak Control
• Bumpless Auto/Manual Transfer
• NEMA 4X (IP65) Dust and Splash-Proof Front Panel
• Decimal Display in 0.1° for Measured Temperatures Under 1000° F or C
• On/Off through Full PID Operation (P, PI, PD, PID)
• Adjustable Hysteresis and Deadband
• Outputs Configurable as Alarms
• Field-Configurable Process or Deviation Alarms; Latching or Non-Latching; Band and Inverse Band
• Dual Output/Dual Alarm Capabilities
• UL, cUL, and CE Approvals
• Options Include Remote Analog Setpoint, Multi- Function Contact/Digital Input, Transducer Excitation, and Auxiliary Output
• Special and Custom Options Available
Downloads
Datasheet
Manual - Basic
Manual - Standard Options & User's Guide
|
|
|
Series OTC25 DIN Temperature Controller
|
|
 The Athena OTC25 is a 1/4 DIN panel mounted, digital controller that can be used for precise control of a single loop with two independent outputs. The controller accepts thermocouple input, and a large easy-to-read digital LED display is selectable for either setpoint or process temperature.
• Accepts Type J (OTC25-N &L) or Type J and K (OTC25-P) Thermocouple Input
• Adjustable Output Hysteresis to Prevent Rapid Cycling Around Setpoint Temperature
• Adjustable Deviation Alarm Flashes When Measured Temperature Exceeds or Falls Below Setpoint Temperature
• NEMA 4X (IP65) Front Bezel, Splash-Proof and Resistant to Dust
• Discrete Status Indicators Illuminate When Temperature Display, Setpoint Display, Limit Display, or Heat/Cool Output is Active
• RU, cRU, CE, and FM Approvals
Downloads
Datasheet
Manual
|
|
|
