|
86 Series
|
|
 Low Cost, Non-Indicating Temperature Controller
The Athena Series 86 is a non-indicating, case or track mounted temperature controller that can be used for differential (on-off) to proportional control via simple adjustment. The controller accepts thermocouple or RTD input, and offers field changeable control outputs for relay, SS relay, or pulsed voltage.
• Single-turn, 270° Rotation Potentiometer
• Field Changeable Control Outputs: Relay, SS Relay or Pulsed Voltage
• Failsafe in Open Sensor Conditions
• Optional Remote Setpoint
• Optional Solid-State Contactors for Boosting Power Handling Capacity
• Cooling Configuration Available
• Thermocouple or RTD Input
• Limit Controller Option
Download:
Datasheet
Manual
|
|
|
4000 Series
|
|
 Digital Indicating, Full Feature Short Case Temperature Controllers
The Athena 4000 is a 1/4 DIN panel mounted, short metal case enclosed controller that can be used for accurate proportional temperature control of most processes. The controller accepts thermocouple or RTD input, and offers a choice of standard single outputs for energizing most common output devices. A single, digital filtered LED display provides visual indication of various controller functions.
• Noise-Immune Analog Circuitry
• 25-turn Setpoint Pots-Optional Second (Alarm) Setpoint
• Adjustable Bandwidth and Manual Reset to Eliminate Offset Error
• 3-Mode PID Available
• Available as FM-Approved Limit Controller
Download:
Datasheet
Manual
|
|
|
|
|
88 Series
|
|
 Electronic Temperature Controllers
The Athena Series 88 is a non-indicating, track mounted temperature controller that can be used as a superior replacement for bulb and capillary controllers. The controller accepts thermocouple input, and offers a 20 Amp relay output.
• On-Off or Time Proportioning
• Failsafe on Open Sensor
• No Calibration Necessary
• 1% Accuracy
• Thermocouple Input
• Track Mounted
• Cooling Processes
• Limit Controller Option
Download:
Datasheet
Manual
|
|
|
Model OTC25 DIN Temperature Controller
|
|
 The Athena OTC25 is a 1/4 DIN panel mounted, digital controller that can be used for precise control of a single loop with two independent outputs. The controller accepts thermocouple input, and a large easy-to-read digital LED display is selectable for either setpoint or process temperature.
• Accepts Type J (OTC25-N &L) or Type J and K (OTC25-P) Thermocouple Input
• Adjustable Output Hysteresis to Prevent Rapid Cycling Around Setpoint Temperature
• Adjustable Deviation Alarm Flashes When Measured Temperature Exceeds or Falls Below Setpoint Temperature
• NEMA 4X (IP65) Front Bezel, Splash-Proof and Resistant to Dust
• Discrete Status Indicators Illuminate When Temperature Display, Setpoint Display, Limit Display, or Heat/Cool Output is Active
• RU, cRU, CE, and FM Approvals
Downloads
Datasheet
Manual
|
|
|
