A higher level of control™

Other Products for CPG

Model F1C and F3C Foundation Series Control

F1C F3CThe Athena F1C and F3C are DIN rail mounted, autotuning controls that can be used for precise control of processes. The control outputs can be configured as direct-acting, reverse-acting or alarm. A bidirectional RS-485 communications interface is standard. Discrete status LED displays are provided for system status.

Model F10/F1C/F30/F3C Option Modules

Purchase this item online

Model 15C Foundation Series Control

15CAthena’s new F15C Control offers two channels of control in a low-cost open-board configuration. The control can be configured to accept T/C (type “J” or “K”), RTD or Analog inputs. The control has a four segment integral display and push buttons.

pdf Model F15C (311 KB)

Purchase this item online

P116 Control

P116ControlAthena's P116 auto tuning control is panel mounted and can be used for precise control of a single loop with independent outputs. RS-485 communications interface is available and a large digital LED display provides visual indication of various control functions. The P116 control fits 1/16 DIN panels and has an IP rating of 65.

pdf P116 Controller (319 KB)

Purchase this item online

P108 Control

P108Athena's P108 auto tuning control is panel mounted and can be used for precise control of a single loop with independent outputs. RS-485 communications interface is available and a large digital LED display provides visual indication of various control functions. The P116 control fits 1/8 DIN panels and has an IP rating of 65.

pdf P108 Controller (319 KB)

Purchase this item online

P104 Control

P104Athena's P104 auto tuning control is panel mounted and can be used for precise control of a single loop with independent outputs. RS-485 communications interface is available and a large digital LED display provides visual indication of various control functions. The P104 control fits ¼ DIN panels and has an IP rating of 65.

pdf P104 Controller (319 KB)

Purchase this item online

Model 1ZC DIN Control

1ZCThe Athena 1ZC is a DIN rail mounted, auto-tuning control that can be used for precise control of a single control loop with two independent outputs configurable as direct-acting, reverse-acting or alarm. A bidirectional RS-485 serial communications interface is standard. Discrete LED displays become illuminated whenever associated outputs are active and provide system status. A wide range of sensor inputs are supported and many types of outputs are available.

pdf Series 1ZC (292 KB)

Purchase this item online

Series 16C DIN Temperature/Process Control

16cThe Athena 16C is a 1/16 DIN panel mounted, autotuning controller that can be used for precise control of a single loop with two independent outputs field configurable as direct acting, reverse acting or alarm. RS-232 or RS-485 communications interfaces are available, and two digital LED displays provide visual indication of various controller functions.

pdf SERIES 16C (5.93 MB)

Purchase this item online

Legacy Series 16 Universal DIN Temperature/Process Control

LegacySeries16DINThe Athena Legacy Series 16 is a 1/16 DIN panel mounted, auto-tuning control that can be used for precise control of a single loop with two independent outputs. The control accepts thermocouple, RTD, voltage, or current input. RS-232 or RS-485 communications are available, and two digital LED displays provide visual indication of various control functions.

pdf SERIES 16 (1.28 MB)

Purchase this item online

Model 2C/4C Foundation Series Control

2C 4CThe Athena embedded Multi-Loop PID Control offers two (2C) or four (4C) loops of PID control for less cost than four separate loop controls with similar capabilities.The control offers universal RTD, TC and linear inputs with each PID loop capable of being independently autotuned. The controller has a digital display output port and an expansion port (one on 2C) (two on 4C) for optional expansion cards.

Model 2C/4C Foundation Series

Purchase this item online