A higher level of controlâ„¢

Embedded Controls

Model F10 and F30 Foundation Series Controls

F1C F3CThe Athena F10 and F30 are DIN rail mounted, autotuning controls that can be used for precise control of processes. The control outputs can be configured as direct-acting, reverse-acting or alarm. A bidirectional RS-485 communications interface is standard. Discrete status LED displays are provided for system status. The functionality of the F10 and F30 can be enhanced to include more analog inputs, digital inputs, digital outputs and analog outputs through the use of expansion modules.

Download Model F10 and F30 Datasheet

Model 20/40 Foundation Series Control

2C 4CThe Athena embedded Multi-Loop PID Control offers two (20) or four (40) loops of PID control for less cost than four separate loop controls with similar capabilities. The control offers universal RTD, TC and linear inputs with each PID loop capable of being independently autotuned. The control has a digital display output port and an expansion port (one on 20) (two on 40) for optional expansion cards.

Download Model 20/40 Datasheet

Model EMC10 Foundation Series Control

EMC10Athena's Foundation Series EMC10 Single Channel Control offers one channel of On/Off control in a low cost open board configuration. The control can be configured to accept T/C (type "J" or "K"), RTD or Thermistor inputs. The control has a four segment integral display and pushbuttons.