A higher level of control™

Embedded Controls

Model F10 and F30 Foundation Series Controls

F1C F3CThe Athena F10 and F30 are DIN rail mounted, autotuning controls that can be used for precise control of processes. The control outputs can be configured as direct-acting, reverse-acting or alarm. A bidirectional RS-485 communications interface is standard. Discrete status LED displays are provided for system status. The functionality of the F10 and F30 can be enhanced to include more analog inputs, digital inputs, digital outputs and analog outputs through the use of expansion modules.

pdf Model F10/F30 (311 KB)

 

Model 20/40 Foundation Series Control

2C 4CThe Athena embedded Multi-Loop PID Control offers two (20) or four (40) loops of PID control for less cost than four separate loop controls with similar capabilities. The control offers universal RTD, TC and linear inputs with each PID loop capable of being independently autotuned. The control has a digital display output port and an expansion port (one on 20) (two on 40) for optional expansion cards.

pdf Model 20/40 and 2C/4C Digital Display Boards (324 KB)

 

Model F1C/F3C Foundation Series Controls

F1C F3CThe Athena F1C and F3C are DIN rail mounted, auto-tuning controls that can be used for precise control of processes. The control outputs can be configured as direct-acting, reverse-acting or alarm. A bidirectional RS-485 communications interface is standard. Discrete status LED displays are provided for system status.

pdf Model F1C/F3C (315 KB)

 

Model 2C/4C Foundation Series Controls

2C 4CThe Athena embedded Multi-Loop PID Control offers two (2C) or four (4C) loops of PID control for less cost than four separate loop controls with similar capabilities.The control offers universal RTD, TC and linear inputs with each PID loop capable of being independently autotuned. The controller has a digital display output port and an expansion port (one on 2C) (two on 4C) for optional expansion cards.

pdf Model 2C/4C Foundation Series (335 KB)

 

Series 86 Analog Temperature Controls

86The Athena Series 86 is a non-indicating, case or track mounted temperature controller that can be used for differential (on-off) to proportional control via simple adjustment. The controller accepts thermocouple or RTD input, and offers field changeable control outputs for relay, SS relay, or pulsed voltage.

pdf Analog Series 86 Electronic Temperature Control (356 KB)

 

Series 88 Analog Temperature Controls

88The Athena Series 88 is a non-indicating, track mounted temperature controller that can be used as a superior replacement for bulb and capillary controllers. The controller accepts thermocouple input, and offers a 20 Amp relay output.

pdf Analog Series 88 Electronic Temperature Control (280 KB)

 

Model EMC10 Foundation Series Controls

EMC10Athena's Foundation Series EMC10 Single Channel Control offers one channel of On/Off control in a low cost open board configuration. The control can be configured to accept T/C (type "J" or "K"), RTD or Thermistor inputs. The control has a four segment integral display and pushbuttons.

pdf Model F10/F30 (311 KB)

 

F36 Dual PWM to Analog Output Module

F36The Athena F36 Dual PWM to Analog Output Modules accepts PWM digital inputs and converts to 4-20mA, 0-20mA, 2-10Vdc or 0-10Vdc outputs. The PWM inputs can be either 24Vdc or 5Vdc. The input level and output types are both jumper selected. The input signal cycle time period must be 200mS.

pdf Foundation DIN Rail Mounted Accessory Modules (267 KB)

 

F37 Remote Excitation Power Supply Expansion Module

F37The Athena F37 has two fully isolated sensor excitation power supplies and each power supply can be ordered as 24Vdc @ 40mA, 15Vdc @ 40ma, 10Vdc @ 40mA, 5Vdc @ 40mA or 5Vdc @ 100mA.

pdf Foundation DIN Rail Mounted Accessory Modules (267 KB)

 

F38 RS485 to USB Convertor Expansion Module

F38The Athena F38 module converts RS485 differential signal to USB. The module is self-powered through the USB port. The RS485 port is isolated from the USB port. The USB connector is a USB-MINI 5-pin and the RS485 port has communications ground and termination options.

pdf Foundation DIN Rail Mounted Accessory Modules (267 KB)

 

Model 1ZC DIN Control

1ZCThe Athena 1ZC is a DIN rail mounted, auto-tuning control that can be used for precise control of a single control loop with two independent outputs configurable as direct-acting, reverse-acting or alarm. A bidirectional RS-485 serial communications interface is standard. Discrete LED displays become illuminated whenever associated outputs are active and provide system status. A wide range of sensor inputs are supported and many types of outputs are available.

pdf Series 1ZC (292 KB)

 

PWM Analog Converter

PWMAthena PWM Series Converters are designed to convert a 4-20 mA input from a process/temperature controller or computer to a time proportional output. The modules mount directly to the input terminals on a 3-32 VDC input SSR, and support single or three phase 50 or 60 Hz operation. Lever clamps are provided on the converter for the 4-20 mA input. The SSR’s power section provides easy connection to the line and load.

pdf PWM Series Pulse Control Converter (153 KB)