A higher level of control™

Other Products for General Industrial

Series 19 and 39 SCR Power Controls

19-39-SCRAthena 19 and 39 controls are available as zero voltage switched controllers (19Z and 39Z) and phase angle
fired controls (19P and 39P) that can be used for control of resistive heater loads. The control provides capacity up to 80 Amps, and extends heater life while eliminating thermal shock.

pdf Series 19 and 39 SCR Power Controls (131 KB)

Purchase this item online

Series 4000 Analog Temperature Controls

4000The Athena 4000 is a 1/4 DIN panel mounted, short metal case enclosed control that can be used for accurate proportional temperature control of most processes. The controller accepts thermocouple or RTD input, and offers a choice of standard single outputs for energizing most common output devices. A single, digital filtered LED display provides visual indication of various control functions.

Analog Series 4000 Temperature Controls

Purchase this item online

Series 2000 Analog Temperature Controls

2000The Athena 2000 is a 1/4 DIN panel mounted, full featured, metal case enclosed control that can be used for accurate proportional control of most processes. The Control accepts thermocouple or RTD input and offers a choice of standard single outputs for energizing most common devices. A dual meter dial display provides visual indication of various control functions.

Analog Series 2000 Temperature Controls

Purchase this item online

Series 1/16 DIN Universal Process Control

LegacySeries16DINThe Athena Legacy 16 is a 1/16 DIN panel mounted, auto-tuning control that can be used for precise control of a single loop with two independent outputs. The controller accepts thermocouple, RTD, voltage, or current input. RS-232 or RS-485 communications are available, and two digital LED displays provide visual indication of various control functions.

pdf Legacy Series 16 Universal Process Controller (323 KB)

Purchase this item online

C Series DIN Controls

C-series-18C-19C-25C-ColorAthena’s C Series Digital Controls are designed for a wide range of diverse temperature and process control applications. They are available in several standard models and as quick delivery “customized” models in 1/16 to 1/14 DIN for special input and output requirements.

pdf C Series DIN Controls (199 KB)

Purchase this item online

Series 86 Analog Temperature Control

86The Athena Series 86 is a non-indicating, case or track mounted temperature control that can be used for differential (on-off) to proportional control via simple adjustment. The controller accepts thermocouple or RTD input, and offers field changeable control outputs for relay, SS relay, or pulsed voltage.

Analog Series 86 Temperature Control

Purchase this item online

Series 88 Analog Temperature Control

88The Athena Series 88 is a non-indicating, track mounted temperature control that can be used as a superior replacement for bulb and capillary controllers. The control accepts thermocouple input, and offers a 20 Amp relay output.

Analog Series 88 Temperature Control

Purchase this item online

Model 2C/4C Foundation Series Control

2C 4CThe Athena embedded Multi-Loop PID Control offers two (2C) or four (4C) loops of PID control for less cost than four separate loop controls with similar capabilities.The control offers universal RTD, TC and linear inputs with each PID loop capable of being independently autotuned. The controller has a digital display output port and an expansion port (one on 2C) (two on 4C) for optional expansion cards.

Model 2C/4C Foundation Series

Purchase this item online

Model F1C/F3C Foundation Series Control

F1C F3CThe Athena F1C and F3C are DIN rail mounted, autotuning controls that can be used for precise control of processes. The control outputs can be configured as direct-acting, reverse-acting or alarm. A bidirectional RS-485 communications interface is standard. Discrete status LED displays are provided for system status.

Model F1C/F3C Foundation Series

Purchase this item online

Model 15C Foundation Series Controls

15CAthena’s new F15C Control offers two channels of control in a low-cost open-board configuration. The control can be configured to accept T/C (type “J” or “K”), RTD or Analog inputs. The control has a four segment integral display and push buttons.

pdf Model 15C Foundation Series (311 KB)

Purchase this item online

Model EMC10 Foundation Series Control

EMC10Athena’s new EMC10 Control offers 1 channel of On/Off Control in a low-cost open-board configuration. The control can be configured to accept Thermistor Input.The control has a four-segment integral display and push buttons.

pdf Model EMC10 Foundation Series (264 KB)

Purchase this item online